A proposed ISO Technical Specification would set a common way to calculate greenhouse gas (GHG) emissions from building a ship. We invite experts to help shape it through their national standards body.
A proposal for a new ISO project has been submitted to the International Organization for Standardization (ISO). The project would develop a common methodology for calculating GHG emissions from shipbuilding. It covers the emissions a ship generates before it enters service, from raw material extraction to shipyard construction and sea trial.
The proposal started as a BIMCO initiative and was developed by a BIMCO-led industry working group. Danish Standards formally submitted it on 4 October 2026. Participating national standards bodies are now voting on it, and the ballot closes on 27 December 2026. If the proposal is approved, Everllence and Danish Standards will lead further development, with support from BIMCO.
Contents
Closing a gap in lifecycle emissions data
From raw materials to sea trials
Greater transparency between buyer and builder
A starting point, not a finished standard
Closing a gap in lifecycle emissions data
The shipping industry has traditionally focused on emissions from burning fuel during ship operations. Existing mandatory IMO regulations already cover these emissions, including IMO fuel consumption reporting and the IMO Guidelines on life cycle GHG intensity of marine fuels.
However, a ship also generates substantial emissions before it enters service. Sources include raw material extraction, steel and other materials, component manufacturing, transport and shipyard work. There is currently no harmonised, shipping-specific methodology for calculating these emissions.
"We initiated this work because the lack of a common methodology creates a gap for shipowners seeking reliable information about the lifecycle GHG emissions of their assets. By bringing together parties from across the maritime value chain, we have developed a concrete technical proposal that has now entered the formal ISO process,"
- Aron Frank Sørensen, BIMCO's Chief Environment Officer
The methodology would be relevant for shipowners who:
- Choose to report Scope 3 GHG emissions voluntarily, such as emissions from buying newbuild ships, using frameworks like the GHG Protocol Corporate Standard
- Are required to calculate and report Scope 3 emissions under regional or national legislation.
From raw materials to sea trials
The proposed Technical Specification covers cradle-to-gate emissions. This runs from the extraction and processing of raw materials through:
- Component manufacturing and transport
- Shipyard construction
- Waste handling
- Launching, testing and sea trials.
Equipment manufacturers, repair yards and shipowners could also apply the same methodology to major conversions, major repairs and new equipment installed during a ship's operational lifetime.
Some emissions are outside the proposed scope: fuel use during operation, day-to-day maintenance after delivery, and anything after a ship arrives for recycling. Existing regulations and standards cover some of these emissions, and future ISO standards could cover other lifecycle emissions.
"We need a standardised approach to calculating GHG emissions from shipbuilding to be able to focus on emissions arising from this part of the maritime industry. Through an international, technical standard we can achieve a harmonised way of identifying hotspots in the construction process and recognise the role of shipbuilding in the overall emissions calculation,"
- Edith Buhl, Life Cycle Assessment Specialist at Everllence Denmark A/S and nominated project leader for the ISO project proposal.
Practical calculation options
The proposed methodology builds on the ISO 14040 and ISO 14060 families of standards and the GHG Protocol. It offers four calculation methods to suit different levels of available data:
- Supplier-specific
- Hybrid
- Average-data
- Spend-based.
Supplier-specific data would be preferred where it is available. The other methods would allow credible estimates where detailed data is not yet accessible.
Greater transparency between buyer and builder
A harmonised methodology could help shipowners, shipyards, equipment manufacturers and other stakeholders calculate, disclose and ultimately reduce shipbuilding emissions. It could also help identify emissions hotspots, support credible sustainability reporting and reduce the risk of inconsistent or misleading GHG reduction claims.
The methodology is meant to make it clearer to both parties which calculation methods were used: the shipowner as buyer and the shipyard as seller. It could also make reliable emissions data easier and cheaper for shipowners to obtain, because shipyards could follow a methodology set by ISO instead of developing their own.
Results will not automatically be comparable between ships or companies. Comparability will depend on consistent boundaries, calculation methods, data quality and disclosed assumptions.
BIMCO's aim is not to set a particular environmental performance level, but rather to aim for a credible, practical methodology so the industry can calculate and report emissions on a consistent basis.
From Tripartite to ISO
The project started in the Tripartite forum, which brings together shipyards, international shipowners' organisations and IACS classification societies.
- November 2024: Tripartite agreed that a joint industry working group, led by BIMCO, should prepare input for a possible ISO project on GHG accounting for shipbuilding
- May to December 2025: BIMCO chaired the working group. Its roughly 20 participants represented shipowner associations, shipowners, shipbuilding associations, shipyards, equipment manufacturers and classification societies. The group produced the initial draft methodology that accompanies the proposal
- June 2026: After working with Danish Standards to bring the proposal into the ISO process, BIMCO presented it in Paris to ISO/TC 8/SC 25 on Maritime GHG Reduction. Discussions there indicated strong support.
A starting point, not a finished standard
The industry draft is intentionally a starting point for ISO's technical work, not the final methodology. The ISO working group can reconsider everything in it, and the participating experts still have significant technical work to do.
The proposal is for a Technical Specification rather than an International Standard because the methodology needs further technical development and practical industry input. Depending on how it works in practice, it could later become the basis for an International Standard.
If the proposal is approved, work is expected to start in January 2027 under ISO/TC 8/SC 25/WG 3 (Maritime GHG assessment and documentation). The proposed development period is 24 months, with completion by December 2028.
"The project comes at an important time, when the industry needs a common language for greenhouse gas emissions. Standards are strongest when they are built on industry expertise and practical experience. That is why it is important for industry stakeholders to engage through their national standards bodies and contribute to developing the common solutions the industry will need,"
- Asker Juul, Head of Energy and Transport at Danish Standards.
Call for experts
The methodology needs active participation from shipbuilders, equipment manufacturers, shipowners and other stakeholders to be technically sound and workable across the global maritime value chain. Participation from the major shipbuilding, ship-owning and equipment-manufacturing nations is especially important. That will help make sure the methodology works across regions, jurisdictions and corporate GHG accounting frameworks.
We invite Interested experts to contribute their knowledge and perspectives and help shape the new specification. Both technical expertise and a practical, user-oriented perspective are important to ensure that the specification is robust and applicable in practice. By taking part, experts will also gain early insight into its development and final direction. Participation takes place through their national standards body.